FUJIKURA FUSION SPLICER FSM-12S

Description

Applicable fibers

Single / SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)

Cladding dia./ Sheathe dia.

125µm to 3mm by fiber holder system

Cleave length

5mm to 13mm

Splice mode / heating mode

Total 100 splice modes / 30 heating modes

Typical splice loss

0.05dB (SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.

Splice time / tube heating time

Typical 15sec with SM
Typical 30sec with FP-03(60mm) sleeve

Splice result storage

Last 2000 splices

Viewing methods / magnification

2 axis 2CMOS camera with 4.47" color LCD. 100X magnification.

Tension test

1.96 to 2.25N

Applicable protection sleeve

60mm, 40mm and Fujikura micro sleeves

No. of splice / heating per battery full charge

Typical 100 cycles with BTR-10(Lithium battery)

Electrode life

3000 splices

Size / weight

121W x 162D x 57H mm / 776g(including battery)

Operating condition

Altitude : 0 to 3,660m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Hµmidity : 0 to 95%RH, non-dew

Other features

PC software upgrade / data management

Resistance features

Shock resistance : 76cm (30inch) bottom surface drop^*1

Dust resistance : Exposure to dust( 0.1 to 500µm dia. Alumina Silicate).^*1

Rain resistance : H=10mm/hr for 10min^*1